Products


50
Yes
detail
detail
None
1
10
Search Products
/product-search/
Detail
Filter

Upload PDF Datasheet at here:

Product Types

Markets

980 nm Pump Lasers – Dual Chip

II-VI offers a variety of single-chip pump lasers addressing all areas of low noise all-optical amplification and power consumption requirements. Increasingly, network providers are concerned with component density and power consumption which translates into cost of installation and cost of ownership of a network. To address this, II-VI Photonics offers a suite of 980 nm pump lasers from uncooled, semi-cooled and traditional-cooled pumps over a set of market leading power ranges.

Traditional cooled pumps

  • 14-pin and new 10-pin package format
  • To 1000 mW power range
  • -20 to 75 C operating temperature

Semi-cooled pumps

  • 14-pin and new 10-pin package format
  • To 600 mW power range
  • -20 to 75 C operating temperature

Uncooled pumps

  • SFF 8-pin and new 10-pin package format
  • To 500 mW power range
  • -5 to 75 C
  • High return loss

Applications

  • Multi-stage DWDM
  • Low-noise EDFA
  • SFF and micro-amp applications
980 nm Pump Lasers – Single Chip

II-VI offers a variety of single-chip pump lasers addressing all areas of low noise all-optical amplification and power consumption requirements. Increasingly, network providers are concerned with component density and power consumption which translates into cost of installation and cost of ownership of a network. To address this, II-VI Photonics offers a suite of 980 nm pump lasers from uncooled, semi-cooled and traditional-cooled pumps over a set of market leading power ranges.

Traditional cooled pumps

  • 14-pin and new 10-pin package format
  • To 1000 mW power range
  • -20 to 75 C operating temperature

Semi-cooled pumps

  • 14-pin and new 10-pin package format
  • To 600 mW power range
  • -20 to 75 C operating temperature

Uncooled pumps

  • SFF 8-pin and new 10-pin package format
  • To 500 mW power range
  • -5 to 75 C
  • High return loss

Applications

  • Multi-stage DWDM
  • Low-noise EDFA
  • SFF and micro-amp applications

Datasheet

Cooled 10-pin, 200 to 600 mW D50563-PB
Cooled 14-pin, 200 to 600 mW D50561-PB
Cooled 10-pin, Low power consumption, 200 to 600mW D50564-PB
Cooled 14-pin, Low power consumption, 200 to 600mW D50562-PB
Cooled 10-pin, 610 mW to 1W D50574-PB
Uncooled 8-pin, 110 to 300 mW D50569-PB
Uncooled 10-pin, 310 to 500 mW D50570-PB

 

CM97-1000-76PM

976nm Mini-Butterfly Laser Diode Pump Module with FBG and PM Fiber

The II-VI CM97-1000-76PM wavelength stabilized high power single mode laser diode module has been designed as a pump source for industrial pulsed fiber pre-amplifiers as well as for erbium doped fiber amplifier (EDFA) laser applications. Processes and techniques of coupling the fiber to the laser allow very high output powers that are stable with both time and temperature. The pump module utilizes a Polarization maintaining fiber pigtail and a fiber Bragg grating design for enhanced wavelength and power stability performance. Devices achieve high kink free output powers of 1W.

Applications

  • Fiber lasers
  • Sensing
  • EDFA

Features

  • High output power, 1W kink free
  • Wavelength stabilized at 976nm
  • Polarization maintaining single-mode optical fiber
  • Internal thermoelectric heat pump and monitor diode
  • Hermetically sealed 10-pin mini- butterfly package
  • Telcordia GR-468-CORE compliant
  • RoHS compliant

 

High-Power Pumps

Applications

  • High noise EDFAs
  • Dense wavelength division multiplexing (DWDM) EDFAs
  • CATV Applications

Features

  • SFF 10-pin mBTF MSA package
  • Kink free powers to 1050mW
  • SM fibre and FBG for optimal wavelength locking
  • Optimized Power Stability

Parameters

  • 610 to 1050mW optical output power
  • < 8W total module consumption
  • Operating temp range from -20 to 75°C
Uncooled 980 nm pump laser module – 3-pin Micro-format

II-VI’s MLU96Z-series is an uncooled 980 nm pump laser module in a compact 3-pin micro-format package designed to meet the stringent reliability and power-efficiency requirements of ultra-compact amplification in current and next generation high bit-rate transceivers. II-VI’s MLU96Z-series measures only 141 cubic millimeters in volume and features an 80 micron small-bend radius polarization-maintaining fiber pigtail to enable optical amplification within small transceiver packages. The MLU96Z-series consumes less than 0.5 Watt of power at the typical use conditions and up to 80 °C maximum operating temperature, addressing the critical power consumption requirements of pluggable transceivers.

The MLU96Z-series is built on II-VI’s field proven OC-2 fiber alignment platform and relies on II-VI’s market-proven G08 laser chip platform to ensure superior wavelength locking performance, reliability and stability

Applications

  • Integrated amplification within high bit-rate transceiver modules - CFP2/4

Features

  • FBG located within the package supports shorter fibre lengths
  • 80um PANDA PM fibre supports 5mm bend radius
  • Pins support through-hole and surface mount forming and soldering

Parameters

  • 80°C operating temperature range
  • Up to 400mW kink-free output power
  • Typically <1W power consumption
Uncooled 980 nm pump laser module – 8-pin Mini-DIL

The LU96Z-series uncooled pump laser module in an 8-pin mini-DIL package is II-VI’s third-generation uncooled pump module providing low power consumption for highly reliable metro, cross-connect, SFF single and multi-channel amplifier designs plus high bit-rate, per-channel amplification.
The LU96Z-series is designed for uncooled operation at high temperature and power levels. Qualification of the enhanced G08 chip ensures high reliability even at high operating power, 75°C. External Fiber Bragg Grating (FBG) stabilization provides excellent wavelength and power stability over the entire operating temperature range.

Features

  • Up to 500mW kink-free power over full operating temperature range
  • Operating temperature range from -5°C to +75°C
  • Polarization maintaining (PM) fiber
  • Low power dissipation
  • Small form factor mini-DIL package
  • Wavelength stabilized by fiber Bragg grating over entire operating range
  • Centre wavelength at 974 and 976nm
  • Telcordia GR-468-CORE compliant
  • RoHS compliant

Applications

  • Low noise EDFA requiring higher optical power with low power consumption and small form-factor package
  • Single or multi-stage EDFA applications including Single-channel and DWDM designs
980 nm Pump Lasers – Dual Chip
II-VI offers a variety of single-chip pump lasers addressing all areas of low noise all-optical amplification and power consumption requirements. Increasingly, network providers are concerned with component density and power consumption which tran... Read More
980 nm Pump Lasers – Single Chip
II-VI offers a variety of single-chip pump lasers addressing all areas of low noise all-optical amplification and power consumption requirements. Increasingly, network providers are concerned with component density and power consumption which tran... Read More
CM97-1000-76PM
976nm Mini-Butterfly Laser Diode Pump Module with FBG and PM Fiber The II-VI CM97-1000-76PM wavelength stabilized high power single mode laser diode module has been designed as a pump source for industrial pulsed fiber pre... Read More
High-Power Pumps
Applications High noise EDFAs Dense wavelength division multiplexing (DWDM) EDFAs CATV Applications Features... Read More
Uncooled 980 nm pump laser module – 3-pin Micro-format
II-VI’s MLU96Z-series is an uncooled 980 nm pump laser module in a compact 3-pin micro-format package designed to meet the stringent reliability and power-efficiency requirements of ultra-compact amplification in current and next generation high... Read More
Uncooled 980 nm pump laser module – 8-pin Mini-DIL
The LU96Z-series uncooled pump laser module in an 8-pin mini-DIL package is II-VI’s third-generation uncooled pump module providing low power consumption for highly reliable metro, cross-connect, SFF single and multi-channel amplifier designs pl... Read More
Share This
X